Custom Fit Roof Rack Kit With DK227 | RB1375B | RRRLKHD
(115 reviews)
Price: $558.67
In Stock
Custom Fit Roof Rack Kit With DK227 | RB1375B | RRRLKHD
Item # RR57BP
Our Price: $558.67
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (115)
- Q & A (0)
- Videos (4)
- Photos
Rhino Rack Roof Rack - RR57BP
- Square Bars
- Crossbars
- 54 Inch Bar Space
- Rhino Rack
- Black
- Overhang
- 2 Bars
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.
Features:
Rhino-Rack HD Crossbars - Black - Qty 2:- Heavy-Duty square crossbars let you build a roof rack system from scratch
- Built-in C-channel on top of each bar is designed for mounting Rhino-Rack Heavy-Duty accessories and carriers
- Rubber strip in the channel helps to cushion load and provide slip resistance
- Built-in channel on bottom of each bar for mounting to Rhino-Rack Heavy-Duty roof rack legs
- Lightweight, extruded, structural-grade aluminum construction for strength and durability
- Black color
DK Fit Kit for Rhino-Rack 2500 Legs - Heavy Duty:
- Custom fit kit allows you to mount Rhino-Rack 2500 legs on your vehicle with fixed mounting points
- Threaded studs screw into fixed mounting points to provide attachment point for legs
- Legs slide onto studs and secure with hex bolts
- Molded-rubber pads are designed to fit the contours of your roof
- Clip onto the bottoms of your roof rack legs
- Protect your roof from scratches and abrasions
Rhino-Rack 2500 Legs - Heavy Duty - Qty 4:
- Legs let you mount Rhino-Rack Heavy-Duty crossbars to your vehicle's naked roof or fixed mounting points
- Leg bases pivot to ensure the crossbars are level on your roof
- Locks secure system to your roof
- UV-stabilized, glass-reinforced nylon is durable and weather resistant
- Allen key included to ensure legs are securely mounted to your roof
DK227 Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof
RB1375B Rhino-Rack Heavy Duty Roof Rack Crossbar - Black - 54" Long - Qty 1
RLKHD Rhino Rack 2500 Series Leg Kit for HD Cross Bars - Qty 4
Video of Custom Fit Roof Rack Kit With DK227 | RB1375B | RRRLKHD
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Rhino Rack Roof Rack Installation - 2010 Chevrolet Silverado
Today on this 2010 Chevrolet Silverado we are going to install a roof rack from Rhino Rack. We will be using part number DA1375 for the crossbars and it is their elliptical design. And we will also use the pad and clamp kit part number DK227. We have our bars already assembled. We measured out our front rail at 118 millimeters. We measured from here to the inside edge here. And our measurement for our back rail is going to be 109 millimeters. Alright, we have our bars set up. Let us go ahead and start installing the front crossbar. Measure the center of the door jamb to the center of the crossbar. We are going to measure out 9-27/32. 0:38
Once we have our first rail installed, we will go ahead and measure from the center of that one to the back rail. And that measurement will be 31-1/2 inches. Then you go ahead and tighten them down. Using the included tool that comes with the roof rack, we will just snug them down on both sides. Once we have the Rhino Rack installed, we will go ahead and put the covers on the legs and lock them down into place. Alright, with a few easy steps, our Rhino Rack is already installed on the vehicle and ready for service. And there you have it for part number DA1375 and we also used the pad and clamp kit part number DK227.
Customer Reviews
Custom Fit Roof Rack Kit With DK227 | RB1375B | RRRLKHD - RR57BP
Average Customer Rating: 4.6 out of 5 stars (115 Customer Reviews)
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.by: James01/24/2024
I’ve had this rhino rack for over 3 years and it’s been excellent on long road trips to the ski slopes. A year after my purchase, I realized that I was missing the plastic coverings that attached to the end of the bars and called their customer service to resolve the missing pieces. I was impressed with their quick response and seamless delivery.
by: Craig10/13/2023
The rack fit well and was easy to install. Seems to be made well. The problem is the amount of road noise. I never even put the basket on. It was so loud, it roared. I repositioned it several times but the noise was way too much and I finally just removed it. I spent a lot of money for the rack and the basket and now they are in storage. I wish it would have worked out better because I thought it looked really good.
by: Matthew 05/02/2024
Solid product that fit well with the other components.
by: Donald12/12/2021
This has been a disaster, and terrible experience from the start. Original product Rhino roof rack ($188.00) misrepresented for sale, even called and was told all parts were included as "Open Box" item. Received item with missing parts and mismatched parts, then ET sent wrong parts (Legs) causing having to order these cross bars ($192.00) to fit parts sent (Legs). Now my $300.00 BougeRV ski rack - mounting base plates won't fit the crossbars. Still waiting for return label for original item so I can get my refund of $188.00. Three weeks later, still dealing with problem. I do appreciate Shawnee and EDW for their efforts in follow up service attempts.
by: Chris M.02/06/2019
Great product, fit was spot on with correct vehicle specific parts. Etrailer
was fantastic to work with. Great communication and feedback, worked through a small problem with positive outcome. Will definitely purchase from them again, their customer service department is top notch.
by: Bill Boedeker05/05/2015
Ordered a Rhino Rack for my 2014 GMC Sierra 2500HD Denali. Rack arrived in very good shape and all items were there. Installing at this time and see no problems ahead.
by: Philip08/17/2022
Tricky to rivet tracks onto car with a manual riveter but once done, a great solution for the car with ease of bar removal. My only regret was going with the square bars which result in notable increase in wind noise.
by: Ethan08/27/2021
High-quality, sturdy rails, but noisy. There was a pronounced and audible whistle driving with these racks at any common road or highway speed (with the rubber inserts installed across the top). I have since replaced these rails with the Rhino vortex aero style (change of vehicles and the HD bars did not fit the new car). Having used both types several times, I would recommend the aero style over the HD if you have the option.
by: Doug C03/22/2015
These made it easy for me to mount a roof basket on top of my truck without drilling holes. This is a great product.
by: Marc M07/17/2014
Product installation instructions were fair, and that is the worst thing I have to say. I havent put anything on the rack yet as I just installed it, but I gave a good tug on the bars and they are SOLID. The product came in a reasonable amount of time, and the feedback for etrailer is that I got followup emails at each step of the process keeping me fully informed right up to the message asking for feedback.
Bottomline: etrailer is a great business to work with, and this product seems to be good too.
by: Michael05/31/2022
Mazda
Thanks to Etrailer, I am ready to do some serious summer exploring with my 2013 Mazda 3! Rhino Racks, Malone top box, and Kuat bike rack!
by: Scott L03/29/2017
I am normally a exclusive Amazon shopper, but etrailer gives equal or better service and has specialty items you just can't find anywhere else. The pricing is great also. This is my 4th order from them on this project and the response has been perfect and the shipping has been prompt. They even offered to take back an item that I did not need. I desperately wanted to mount my 19ft Kayak on my new RV and with some Rhino RT tracks, a Rhino Nautic kayak lifter, a few really heavy duty rivets, and some ingenuity, I was able to accomplish the task. I am replacing the current Nautic bars with the heavy duty bars. See the attached pictures.
by: Gregory08/11/2019
Pontiac Trans Sport Van
Repeat customer of Etrailer. Always great service and support. Here, acquired parts to reconfigure Rhino Racks to fit another truck after a trade. Made the switch seamlessly and racks are now mounted on the new truck. Use them to transport a racing sailing skiff that is not heavy but is bulky. They have moved the boat to regattas around the country without issue. Excellent product.
by: Roger09/09/2022
2001 GMC Sierra
Mounted on 2001 GMC Sierra 2500HD. Excellent fit. Looks clean on truck. Sturdy. Small amount of noise. I would buy again and recommend to others. Price far better than some of the big names for the same quality.
by: Eric 06/12/2023
Good quality and locks are included. The plastic lock covers are flimsy but they will keep an honest person honest.
by: Stephen05/04/2023
2010 Chevrolet Silverado
The Rhino 2500 series is well built. The etrailer customer service person Trevor W. was great. He was so helpful in getting the right components for my Rhino 2500 roof rack to mount to my 2010 Silverado. Thanks for the help Trevor.
by: Larry o02/28/2017
Customer service was very helpful making sure that the correct racks were ordered. Shipping was very fast and tracking package provided up to date info regarding arrival of package. The racks were exactly what I wanted and I am very happy with the product. Will definetly consider etrailer for other products in the future.
by: Steve09/10/2022
After a year of use I can say that this rack and it's fit kit is not bulletproof, but it's darn close!
I give it 4 stars because it is not obvious what is loose if one of the feet start to creep on the roof. WHEN YOU DETECT CREEP BE SURE TO CHECK ALL OF THE CONNECTORS ON THE BAR! Not just the one that "must" be loose!
It took me about 2 months to figure this out and the rack is a design forgiving enough that after about 2,000 miles I still have an undamaged kayak and roof!
by: ashley10/22/2021
I got the roof rack mounted anyways. Better pics to come when it's all finished!
by: Michael06/15/2018
Chevrolet Silverado
A year ago we purchased this Rhino roof rack system/kit to carry our 15ft canoe and 12ft kayak on our Silverado crew cab. We tow a retro camper, carry bikes, and have a toolbox in the bed, so the truck roof was our easiest option. We also bought removable Yakima folding kayak holders (because the beam width of our two boats was too wide for the cross bars - need to carry them on their sides). I appreciate the build quality, the sturdy finishes, the strong materials and smart design of this rack. We followed the enclosed directions and the etrailer installation video and it was easier and faster than we thought. We've logged thousands of highway and north woods miles with this rack and it's still solid as a rock! Only one minor issue... the square Euro cross-bars create wind noise at highway speeds which is only noticeable when you're not carrying canoes (they make enough wind noise on their own!). We just remove the racks when we don't use them - only takes 5 mins. It's a great product and we expect it to last for many more years! Great service from etrailer as well!
by: Mike08/01/2017
Great product everything fit perfectly. With the heavy duty bars almost all the hardware for anything you put on the rack is too short
by: Tim S.07/27/2017
Assembled and installed the roof rack today. I used your websites video's to guide me. Didn't have any problems, everything went smoothly. Highly recommend this company. The product was very well made.
by: Brian B03/20/2017
Chevrolet Silverado
Fit and function perfect. I use this to carry 2 kayaks on top of my Chevy Silverado 2500HD while towing my camper. No issues.
by: Karl N.06/16/2016
Johnathan W. was very helpful giving me advice with the situation I had, carrying our kayaks while pulling our 5th wheel. He recommended the Curt Front Mount Hitch Receiver Custom and a Thule Goal Post Hitch Mounted Load Bar (which I already had). I also purchased a Rhino Rack Square Bar Roof Rack. I received my order promply. I installed both products ( with the help of my 8 year old grandson Hayden ) I am very happy with the quality and easy installation of all products i have ordered from etrailer in the past. I will continue to do so in the future. Now we will be able to take our kayaks while pulling our 5th wheel. Thank-you etrailer!
by: Robert09/16/2021
2006 Chevrolet Silverado
While the quality of all the parts I received and the service I got deserved 5 stars, the fact that the clips which hold the rack onto my roof don't fit (and I was assured they would) gets etrailer 3 stars. My truck is a 2006 Silverado 3500 extended cab and the brackets will not fit over the door rubber and slip under the steel rain gutter. I was told these should fit and they are the only clips they have. Looks like I will have to modify them myself to get everything to work.
25
2875
Show More Reviews
See what our Experts say about this Rhino Rack Roof Rack
- 2013 Pathfinder Naked Roof Roof Rack RecommendationFor your 2013 Nissan Pathfinder the Sportrack Semi-Custom roof rack part # SR1002 has not been confirmed to fit your vehicle, BUT I do have a similar roof rack that would work for you. Instead you would want the Rhino Rack roof rack that consists of part numbers # RB1375B-2 and # CXB if you are looking for the most economical roof rack option around.
view full answer... - How to Measure for Mounting Shorter-Than-Recommended Rhino-Rack Vortex Bars on a 2016 Honda CR-VWith a 2016 Honda CR-V, the appropriate Rhino-Rack crossbar system for the naked roof is: 54" Heavy-Duty Roof Rack Crossbars, part # RB1375B-2 2500 Series Legs, part # RRRLKHD Custom DK Fit Kit, part # DK284 It looks like you have the right legs and fit kit but have the shorter crossbars. This isn't a tested fit, so there's a chance it will not work. However, if your are trying this, then your solution would be the best route. Take the difference divided by 2 (3" on each side), and subtract...
view full answer... - Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
view full answer...
- Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDXI spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
view full answer... - Can a Hollywood Racks 2 Bike Add-On be Added to the # HLY84FR to Carry 4 BikesThe Hollywood Racks Sport Rider # HLY84FR bike rack for electric bikes cannot have one of the add-on Hollywood Racks bike racks, like # HR1475Z, installed to make the rack able to carry 4 bikes. The best option for you to carry 4 bikes on your 2012 Honda Odyssey van would be to use a roof mounted bike rack along with your hitch mounted rack that you already have for your hitch. If your van already has a roof rack with crossbars, then I recommend the Malone Pilot TC ST Roof Bike Rack,...
view full answer... - Can Rhino Rack Square Bars Be Cut Down To Fit A 2014 Scion xB For a 2014 Scion xB we recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2, which are 54" in length. As for cutting down longer Rhino Rack square bars, which I don't recommend, you would need a miter saw with a metal cutting blade and could cut the bars to your specific needs. The end caps would need to be removed first so that you could add them on once you finish cutting. You'll also want to paint any exposed metal after cutting. If you need the mounting hardware for...
view full answer... - Affordable Way To Carry A Kayak On A 2010 Hyundai SonataI have an affordable solution for you, however, the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 54" Long - Qty 2 # RB1375B-2 is not a fit for your 2010 Hyundai Sonata and even if it was, you would need to also buy a few other parts to fit it onto a vehicle so it would not be the price you were looking at. For your vehicle with a naked roof, the SportRack Semi-Custom Roof Rack 50" # SR1002 is going to be your best option. This square bar roof rack includes everything necessary...
view full answer... - Mounting Options for Rhino-Rack Fishing Rod Carrier RR576FThe Rhino-Rack Fishing Rod Carrier # RR576F offers multiple installation options. It can mount to a roof rack by clamping around the rack crossbars (round, square, aero, elliptical, and most factory crossbars) or it can be installed in the top channel of rack crossbars like # RRVA126B-2 and # RB1375B-2 using the included T-bolt hardware shown in the photo which slide into the top channel of such bars. Only if used in the heavy-duty Rhino-Rack bars is the Fit Kit # HD-FK1 needed. The standard...
view full answer...
- Rhino-Rack Heavy-Duty or Vortex Crossbars for 2019 Ford Transit ConnectThe primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels that are made specifically for Rhino-Rack Heavy-Duty accessories like the Hi-Lift Jack Mounting Brackets # RJHB. Because the bars are larger than most other systems they will not be compatible with a lot of accessories that aren't specifically...
view full answer...
- Roof Rack for 2009 Jeep Wrangler Unlimited With Aftermarket Hard Top to Transport 2 KayaksThe roof racks that we offer for the 2009 Jeep Wrangler Unlimited, such as the Rhino-Rack System consisting of parts # RB1375B-2, # RLT500 and # RTC95JW, are intended for use on the OEM hardtop. This system when mounted on the factory hardtop has a maximum cargo weight capacity of 65-lbs. This limit is not a function of the rack materials, but rather the capacity of the OEM roof, and therefore is the same for all other roof racks we offer for your Wrangler. Without knowing the brand and...
view full answer... - What Replacement End Caps do I Need for My Rhino-Rack Heavy Duty Crossbars?We definitely have them! The replacements you need for your Rhino-Rack Heavy Duty Crossbars like the # RB1375B-2 is the Replacement Endcap for Rhino-Rack Heavy-Duty Crossbars - Qty 1 # RRM002. It is important to note that each of these comes with a quantity of 1, so you will need to order 4 total.
view full answer... - What Heavy Duty Crossbar Setup do You Recommend for My Snugtop Camper Shell with Tracks? Without knowing the exact crossbar dimensions that are compatible with your ROAM tent's clamps, we do have a crossbar system that will give you the weight capacity you need to work with your Snugtop camper shell on your 2015 Toyota Tacoma. For this setup, you need the following parts: - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 - x2 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick # RRQMHD05 - Rhino-Rack...
view full answer... - Roof Rack and Canoe Carrier Recommendation for a 2008 Chevy SilveradoA Rhino Rack Roof Rack that includes the part # RRRLKHD would do an excellent job for carrying a 15 foot canoe on your 2008 Chevy Silverado. The rest of the parts needed to complete the roof rack would be the part # RB1375B-2 and # DK227. This is one of the strongest racks we offer so it would definitely take a lot of abuse. It would be great for carrying your canoe. For securing a canoe upside down on the crossbars I would recommend the Ratchet Grab part # RRRRG. I spoke to my contact...
view full answer... - Roof Rack and Platform Recommendation for Roof of 2013 Toyota HighlanderI have a solution for you, you'd want the Rhino Rack HD roof rack part # RB1375B-2, # RRRLKHD, and # DK138 which will allow you to use a Pioneer Platform Tray part # RR42112BF with the adapter part # RR43105. This has a lower capacity listed for what you are wanting to do but that's based on the application of it being used on the highway. For a situation like yours where the weight won't be bouncing around this would work well assuming your Highlander also has a similar weight capacity....
view full answer... - Are There Rails Available For Installing a Roof Rack on a VehicleWe do have rails like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 which mount to naked roof vehicles. They are typically used for camper shells or truck bed rails, but can be used on a vehicle if you are willing to drill into the roof. These rails will allow you to use Track Mount RLTF Legs # RLTF and Rhino-Rack Heavy-Duty square and Aero oval crossbars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 or the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. There are...
view full answer... - Recommended Rhino-Rack Crossbars that fit a 2017 Ford C-MaxI believe the measurement you're looking at is referring to the HD Bars # RB1375B-2 which you don't have, however I can say with certainty that the Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars # RR25SR will fit your 2017 Ford C-Max just fine. The front crossbars measure 43-9/16" long x 3-1/8" wide x 1-3/16" tall, and the rear crossbars measure 41-3/8" long x 3-1/8" wide x 1-3/16" tall.
view full answer... - What Parts do I Need with My Rhino-Rack 54" HD Crossbars to Fit on My 2012 Ford Edge with Bare Roof?According to my research of your Rhino-Rack part number 1375, I think you are most likely referring to the Rhino-Rack Heavy Duty Crossbars -54" Long # RB1375B-2 (black) or # RB1375 (silver) which are confirmed to fit a bare-roof 2012 Ford Edge. If this is what you have, you need the Rhino-Rack 2500 Series Legs # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK228. With both of these components, you will have a full roof rack system on your...
view full answer... - Do I Have To Drill Afer Installing The Tracks On The Rhino Rack Roof Rack System # Y01-120-NT?The foot # RRRLKHD to crossbar # RB1375B-2 is adjustable along the bar with the kit you're looking at # Y01-120B-NT. The only drilling required is to install the tracks so if they are already installed no need to do any more drilling.
view full answer...
- Are the Rhino-Rack Track Mount RLTP Legs Compatible with Yakima TracksWe had the Rhino-Rack Track Mount RLTP Legs, # RLTP, and the Yakima tracks in stock so I pulled them from our warehouse and made a short video for you. I do have a solution for you, however the Rhino-Rack feet are not compatible with the Yakima tracks. Instead, I recommend using the Rhino-Rack RTC Tracks, # RTC14. These tracks are 55 inches long and are compatible with the RLTP legs. They are also more economically priced over the Yakima tracks which will save you some money. I have...
view full answer... - Track Mount vs. Fixed Mount Rack For Tonneau Cover on 2021 Ford F-150Those are good questions, and you will indeed lose quite a bit of functionality going with a fixed rack system compared to a track mounted rack. The reason for that is simply that you'll have the ability to move the crossbars to accommodate whatever it is you need to carry, and depending on what that accessory may be, it won't be able to mount unless your crossbars have a specific spread distance. There is not a desired optimum spacing, that is completely up to you and what you are looking...
view full answer... - Rhino-Rack Roof Rack Recommendation for a 1989 Mitsubishi Montero with a Naked RoofYou are correct, the Rhino-Rack Roof Rack Legs that you need for your 1989 Mitsubishi Montero are part # RL280S4. These are the gutter mount feet and they are 11 inches tall. For crossbars, you can use their Heavy-Duty Crossbars, # RB1375B-2 for black or # RB1375 for silver. I have attached the installation instructions for you to check out.
view full answer...
- Will Rhino-Rack Ski and Snowboard Carrier Fit Exposed Racks Crossbars on Jeep WranglerThe Rhino-Rack Ski and Snowboard Carrier # RR573 will fit your Exposed Racks Roof Rack crossbars. The reason the # HD-FK1 adapter is required for the square Rhino-Rack bars like # RB1375B-2 is because of their 1-7/8" height. The Exposed Racks crossbars are only 1-1/4" x 1-1/4" so you won't have a problem installing the ski/snowboard carrier.
view full answer... - Rhino Rack Tower and Crossbar Compatibility with Thule Factory Installed Tracks on Truck CapYes. The Thule tracks will accept the Rhino-Rack feet and crossbars. The kits like the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long # Y02-480B-NT will work well, or you can piece together the parts you desire. The really nice aspect of Rhino-Rack towers is they come with the included locks and are great quality at a really good price point. To piece together your kit, you will use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC...
view full answer...
- Half Rhino-Rack HD Roof Rack for a 2015 Chevy Colorado Crew Cab with Naked RoofIn order to get half of a Rhino-Rack roof rack for your 2015 Chevy Colorado we just have to piece together the parts. For a single bar you will need # RB1375B. For just 2 feet instead of 4 you will need # RRRLKHDH. And you will need custom clamp kit, # DK330, which is all 4 of the clamps and pads but they are not available individually so you would have to get the whole kit and just use 2 of them.
view full answer... - Does Rhino Rack HD Roof Rack Fit 2011 BMW X3 with Naked Roof and SunroofThe Rhino Rack HD part numbers # RB1250B-2, # RRRLKHD, and # DK295 is a confirmed fit for your 2011 BMW X3 with a naked roof and would not interfere with the sunroof. You aren't going to want to open the sunroof with this rack installed though as it will make quite a bit of noise. If you keep the roof clean as well as the mounting pads of the feet there would not be any long term damage done to the vehicle.
view full answer... - How to Measure for Mounting Shorter-Than-Recommended Rhino-Rack Vortex Bars on a 2016 Honda CR-VWith a 2016 Honda CR-V, the appropriate Rhino-Rack crossbar system for the naked roof is: 54" Heavy-Duty Roof Rack Crossbars, part # RB1375B-2 2500 Series Legs, part # RRRLKHD Custom DK Fit Kit, part # DK284 It looks like you have the right legs and fit kit but have the shorter crossbars. This isn't a tested fit, so there's a chance it will not work. However, if your are trying this, then your solution would be the best route. Take the difference divided by 2 (3" on each side), and subtract...
view full answer... - Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
view full answer... - Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDXI spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
view full answer... - 2023 GMC Sierra 1500 Parts for Rhino-Rack HD Roof Rack SystemIn order to install Rhino-Rack HD bars on your 2023 GMC Sierra 1500 you'll need the following parts: - 59" HD Crossbars # RB1500B-2 - 2500 Series Legs for HD Bars # RRRLKHD - DK Fit Kit # DK427 I'm not 100% sure what multi-purpose holders you're referring to but if you send me some photos of the parts you have I'd be more than happy to help you minimize the amount of parts you're needing to purchase so you can have a roof rack on top of your truck!
view full answer... - Can Rhino Rack Square Bars Be Cut Down To Fit A 2014 Scion xB For a 2014 Scion xB we recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2, which are 54" in length. As for cutting down longer Rhino Rack square bars, which I don't recommend, you would need a miter saw with a metal cutting blade and could cut the bars to your specific needs. The end caps would need to be removed first so that you could add them on once you finish cutting. You'll also want to paint any exposed metal after cutting. If you need the mounting hardware for...
view full answer... - Do Parts of Rhino Rack Roof Rack From 2012 Ford Escape Fit 2014 Ford F-150 SuperCrew Cab?I checked with Rhino Rack and the square bar roof racks that fit a 2012 Ford Escape and 2014 Ford F-150 do share the same # RRRLKHD 2500 Series legs which are for HD crossbars, so if that's what you have you would be able to use those legs on your F-150. If you have different legs there is NOT going to be a fit. Apart from that you are correct that you would need new crossbars and a new fit kit. The correct crossbars for the '14 F-150 would be the Rhino-Rack Heavy-Duty Roof Rack Crossbars...
view full answer... - Parts to Install Rhino-Rack HD Roof Rack to 2013 Nissan CubeThe 54" Rhino-Rack HD Bars # RB1375 will fit your 2013 Nissan Cube but you also need the 2500 Series Legs # RRRLKHD and the Fit Kit # DK263. The legs are what hold your crossbars and the fit kit together while the fit kit secures the whole assembly to your vehicle using clamps for the door jambs. If you check out the standard review video you can get an idea of how this will install but it's important to follow the instructions you receive with your parts as well.
view full answer... - Dual Kayak Carrier For 2017 Ram 1500 With Tonneau CoverI would recommend getting the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500, the Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK043. I've included a video to help you install if you wanted to go that route. Then the most cost effective carrier would be four of the Malone Rack Pads # MPG314, two per crossbar. The foam pads will be less rough on your kayaks whenever you're going down gravel roads....
view full answer... - Kayak Carrier Recommendation for 2009 Ford F-150 With Factory Folding Tonneau CoverA ladder rack is one option for transporting your kayak on your F-150 that has the dealer-installed folding tonneau cover, but note there can sometimes be interference between the common mounting requirements for tonneau covers and ladder racks since both install on the bed rails. I can offer you a simple and very cost-effective option IF your tonneau cover can handle the weight of your kayak. We offer foam block carriers that are very inexpensive, simple to install and that weigh very...
view full answer... - Will the 65" Rhino-Rack HD Crossbars # RB1650 Fit on My 2010 Mazda 3 Hatchback?I have an answer for you. Unfortunately, the 65 inch Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1650 are too long for your 2010 Mazda 3 Hatchback with fixed mounting points. With that being said, you can still have shorter Rhino-Rack Heavy-Duty crossbars on your vehicle. Our installation team here at etrailer has tested these shorter bars with your vehicle so that they will fall within the required dimensions of local traffic laws. For this system, you will need the following parts:...
view full answer... - Rhino Rack Roof Rack Fit for 2013 Ford EscapeTo install the Rhino Rack Heavy Duty Crossbars on your 2013 Ford Escape you will want to use crossbars # RB1375, leg kit # RRRLKHD, and custom clamps and pads # DK375. If you are interested in the Rhino Rack Aero Crossbars, use # RRVA137B-2, # RRRLKVA, and # DK375. I have attached an installation video of the Rhino Rack aero crossbars on a 2013 Ford Escape for you.
view full answer... - Rhino-Rack Heavy-Duty or Vortex Crossbars for 2019 Ford Transit ConnectThe primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels that are made specifically for Rhino-Rack Heavy-Duty accessories like the Hi-Lift Jack Mounting Brackets # RJHB. Because the bars are larger than most other systems they will not be compatible with a lot of accessories that aren't specifically...
view full answer... - Parts Needed To Install Rhino-Rack Pioneer Platform On 2022 Chevy Silverado 2500HD Crew CabYou will need to install the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2 to install a Rhino-Rack Pioneer Platform Roof Tray # RR42TB on your 2022 Chevrolet Silverado 2500HD Crew Cab, since they do not offer a Rhino-Rack Backbone system for your truck. The Rhino-Rack 2500 Series Legs # RRRLKHD and Fit Kit # DK427 are needed to attach the Crossbars # RB1500B-2 on your Silverado. You will then be able to attach the Platform # RR42TB with the Pioneer Platform Mounting Kit for...
view full answer... - Roof Rack Recommendation for a 2007 Chevy Avalanche for Transporting LadderFor your 2004 Chevy Avalanche the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK227 has been confirmed as a fit and would work well. Your sunroof wouldn't be an issue either. I would recommend keeping it closed since it will be very loud transporting a ladder up there from the wind noise. However, I have a better solution for you in terms of a roof rack for securing a ladder. Instead I would recommend the Rhino Rack HD bar roof rack part numbers # RB1375, # RRRLKHD,...
view full answer... - Rhino-Rack 2500 Series Roof Rack for 2015 Ford Transit Connect VanOn the Rhino-Rack system made for your 2015 Ford Transit Connect van, parts # RB1375, # RRRLKHD and # DK417, you will be able to place the 2500-series leg assemblies where you need them so long as they can grip properly on the curved edges of your naked roof. This rack system's heavy-duty crossbars feature a built-in C-channel on top of each bar designed for convenient mounting of Rhino-Rack Heavy-Duty accessories and carriers.
view full answer... - Does a Rhino-Rack Roof Rack Using Factory Mounting Points on a 2013 Honda RidgelineRhino-Rack Leg Kit, # RRRLKVA, mounts to the roof of your 2013 Honda Ridgeline using fit kit # DK155 which are clamps so it will not use the factory mounting points. The correct bars for this application are # RRVA150S-2. All of the roof racks install the same way on your Ridgeline.
view full answer... - Will Rhino Rack HD Roof Rack Fit 2012 Honda CR-V with Moon RoofThe Rhino Rack HD Roof Rack part numbers # RB1375, # RRRLKHD, and # DK284 is a confirmed fit for your 2012 Honda CR-V. It will fit your vehicle with the moonroof, but if your moonroof angles up when opening it could potentially interfere with the bars. You should note that crossbars typically add quite a bit of wind noise. You won't end up wanting to have the moonroof open with the bars installed as it will be quite noisy.
view full answer... - Long Crossbar Roof Rack Recommendation for a 2015 Nissan Rogue with Naked RoofWe have a solution for you. Rhino Rack makes a roof rack available for your 2015 Nissan Rogue with a naked roof that will give you 59 inch long bars. For the bars you would want part # RB1500B-2 for bars, leg kit # RRRLKHD, and # DK396 for the clamp kit.
view full answer... - Which Heavy Duty Crossbar Setup Should I Use On My 2015 Ford F-350 Super Duty?I am showing that the correct Rhino-Rack heavy duty crossbar setup for your 2015 Ford F-350 crew cab is Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long # RB1500B-2. You will also need Leg Kit # RRRLKHD and Fit Kit # DK190 to install this onto your roof. This has a 165lb weigh capacity and is 59" long. You can install accessories by clamping onto the crossbars or by using the T-slot track. I have attached an installation video showing this roof rack being installed on a different...
view full answer... - Will Rhino-Rack HD Square Bar Roof Rack System Fit A 2015 Ford F-150 SuperCrew W/ Dual Sunroofs?You are right on. The Rhino-Rack Roof Rack System that uses 59" Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black # RB1500B-2, Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD, and Custom DK Fit Kit # DK427 is confirmed to fit your 2015 Ford F-150 SuperCrew with the Dual Sunroofs and water gutters. Keep in mind that it is not recommended to open your sunroofs with the crossbars installed to avoid any contact between the sunroofs and the crossbars, and you will find that you...
view full answer... - Height Added to Vehicle with Rhino Rack Foot # RRRLKHDWe've had a similar question to this in the past and we've found that the Rhino Rack HD roof racks that use the feet part # RRRLKHD and also part # RB1500B-2, # RRRLKHD add right at 4-1/2 inches of additional height that would mean the feet without the bar would be a little less than 3 inches in overall height.
view full answer... - Roof Rack and Canoe Carrier Recommendation for a 2008 Chevy SilveradoA Rhino Rack Roof Rack that includes the part # RRRLKHD would do an excellent job for carrying a 15 foot canoe on your 2008 Chevy Silverado. The rest of the parts needed to complete the roof rack would be the part # RB1375B-2 and # DK227. This is one of the strongest racks we offer so it would definitely take a lot of abuse. It would be great for carrying your canoe. For securing a canoe upside down on the crossbars I would recommend the Ratchet Grab part # RRRRG. I spoke to my contact...
view full answer... - Roof Rack and 2-Kayak Carrier for 2016 Honda Accord Sport SedanThe Rhino-Rack ROC25 Series Heavy-Duty roof rack for your 2016 Honda Accord Sport Sedan that is made of parts # RB1375, # RRRLKHD and # DK359 is indeed a confirmed fit for your car. But note that this rack's unusual bar profile means reduced compatibility of accessory items like kayak carriers. You will have fewer kayak carrier choices with this rack. Instead I suggest their Vortex Aero rack # RR32SR which features quieter aerodynamic crossbars that will generate much less wind noise than...
view full answer... - Does Custom DK Fit Kit DK227 For 2012 GMC Sierra 2500 Crew Cab Only Fit Locations in VideoThe locations in the installation video are for the proper spacing of the crossbars for a Rhino-Rack roof rack, but the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK227 does not only fit that specific location. So it can be moved a bit and still clamp onto your 2012 GMC 2500's door jamb. I have added a link below to the installation video for you as well as the instructions if you'd like to take a look.
view full answer... - Recommended Roof Rack and Paddle Board Carrier for 2002 Chevy SilveradoFor your 2002 Chevy Silverado, if you have the extended cab or crew cab I recommend the roof rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 # RRVA137B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA Custom DK Fit Kit # DK227 This rack is rated for up to 130 lbs. For your paddle boards I also recommend using the Inno Board Locker Surfboard Carrier - Locking - Clamp On - 3 Shortboards or 2 Longboards # INA744. This is rated...
view full answer... - Replacement M365 Pads Needed from the Rhino-Rack Fit Kit # DK227Sorry to hear about your pads! I went ahead and called my tech at Rhino-Rack to see if they had replacements of the M365 pads you need. While they do have those pads, the only way to get them is by purchasing another fit kit # DK227. They do not sell the M365 pads individually from the rest of the fit kit.
view full answer...
- Recommended Roof Rack for a 2005 Chevy Avalanche w/ a Naked Roof The best roof rack for your 2005 Chevy Avalanche with a naked roof is going to be the roof rack by Rhino-Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 item # RRVA137B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs - Qty 4 item # RRRLKVA Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof item # DK227 This aero bar roof rack system has a 165 lbs capacity. The included locks...
view full answer... - Roof Rack for Installing Cargo Basket for a 2011 Chevy SilveradoThere are roof racks for your truck that clamp to the door frames so that you would not have to drill the roof of your truck. For that the Rhino Rack parts # RRVA137B-2, # RRRLKVA, and # DK227 would be a confirmed fit for your 2011 Chevy Silverado Crew Cab. Once installed the Loadwarrior part # Y07070 would fit and work well.
view full answer... - Recommended Roof Rack For 2011 Chevrolet Silverado Crew CabWhen considering a roof rack for your Silverado, the cab style and the style roof plays a very important part. It appears you have a Crew Cab so that is the cab-style I will use for selecting a roof rack that will work for you. If you have a different style cab on your truck just let me know and I can make some recommendations that will work for you. The model of your Silverado does not make a difference for the roof racks designed to fit your truck. I recommend the Rhino-Rack 2500 Series...
view full answer... - Roof Rack Recommendation for a 2007 Chevy Avalanche for Transporting LadderFor your 2004 Chevy Avalanche the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK227 has been confirmed as a fit and would work well. Your sunroof wouldn't be an issue either. I would recommend keeping it closed since it will be very loud transporting a ladder up there from the wind noise. However, I have a better solution for you in terms of a roof rack for securing a ladder. Instead I would recommend the Rhino Rack HD bar roof rack part numbers # RB1375, # RRRLKHD,...
view full answer... - Roof Rack and Fairing Recommendation for a 2006 Chevy SilveradoThe Rhino Rack roof rack for your 2006 Chevy Silverado that consists of part numbers # RRVA137B-2, # RRRLKVA, and # DK227 does not include a fairing, but you can get one separately that would work well. For that you would want the part # RRRF3. The bottom of the cross bar will be around 5 inches from the top of your vehicle roof depending on the shape of your roof.
view full answer... - Aftermarket Roof Rack Options For 2011 Chevy AvalancheThere are roof racks that can be installed onto your naked roof via door jams / gutters, however, if you wanted a system to bolt into the roof you would need to go with a system like Yakima # Y57CV. This includes 54" tracks that need to be drilled into your roof and then attach the legs and 60" aero crossbars. This would work but I don't recommend it as it requires drilling new holes into the roof and is much more involving than other roof racks for your vehicle. If you removed the factory...
view full answer... - Recommended Roof Rack/Carrier for 2 Kayaks on 2014 Chevy Silverado 3500 Crew CabFirst, let's start with the kayak carrier. A kayak carrier system like # S512 used with the # RRS512X would allow you to carry two kayaks, while not using a lot of space on the roof. You'll next need to choose a roof rack to provide an attachment point for the kayak carrier. I recommend an Vortex Aero rack from Rhino-Rack which is the most budget friendly aero bar option. The rack consists of the following parts: 54 inch Vortex Aero crossbars, part # RRVA137B-2 Vortex roof rack legs,...
view full answer... - Roof Rack For 2004 Chevy SilveradoThere are no Yakima roof racks that fit a 2004 Chevy Silverado, and as such no fit kits. The only manufacturer who makes a roof rack for your '04 Silverado is Rhino-Rack, and only if you have a Crew Cab or Extended Cab. If that's okay with you, here are the parts needed for a complete roof rack for your truck: - Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 - Rhino-Rack 2500 Series Legs # RRRLKVA - Custom DK Fit Kit # DK227
view full answer... - How Rhino Rack # DK227 Clamp Kit Attaches to Roof of 2008 Chevy SilveradoThe Rhino Rack # DK227 clamp kit fits over the rubber trim at the top of the door jamb. Other than putting holes in the roof of the vehicle, this is the usual way of installing a roof rack that works very well. I haven't heard any reports of leakage or damage to the door gaskets. I don't have any photos available, but if you click the provided link you can see an install video showing the clamp kit being used on a Chevy Silverado.
view full answer... - Roof Rack and Canoe Carrier Recommendation for a 2008 Chevy SilveradoA Rhino Rack Roof Rack that includes the part # RRRLKHD would do an excellent job for carrying a 15 foot canoe on your 2008 Chevy Silverado. The rest of the parts needed to complete the roof rack would be the part # RB1375B-2 and # DK227. This is one of the strongest racks we offer so it would definitely take a lot of abuse. It would be great for carrying your canoe. For securing a canoe upside down on the crossbars I would recommend the Ratchet Grab part # RRRRG. I spoke to my contact...
view full answer... - Recommended Roof Rack And Kayak Carriers For 2013 Chevrolet Silverado Crew CabThe roof rack I recommend for your 2013 Silverado is the Rhino-Rack roof rack. This system has Vortex aero 54 inch crossbars # RRVA137B-2, feet # RRRLKVA, and the custom fit kit # DK227 that attach to the truck doorframe. The kayak carrier I recommend is the Yakima JayLow Folding J-Style Kayak Carrier, part # Y04073. This kayak carrier is a side load and has a built-in ramp that helps you load your kayak easier. This carrier comes with tie-downs and also with locks that secure the carrier...
view full answer... - Rhino-Rack Roof Rack For 2008 Chevrolet SilveradoYes the confirmed kit that fits your 2008 Chevrolet Silverado from Rhino-Rack is listed below. Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Part # RRVA137B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Part # RRRLKVA Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof - Part # DK227 Below I have added a review and installation video of this rack on a Chevy Silverado.
view full answer... - Rhino-Rack Roof Rack For 2004 GMC Sierra 1500 Extended CabIt sounds like you are just looking for a Rhino-Rack roof rack to fit your 2004 GMC Sierra 1500 extended cab, and we do have the parts you need to install one of these racks on your truck. What you will need are the crossbars, legs, and fit kit and you'll have a complete rack. The parts that fit your truck are the following: - Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 - Rhino-Rack 2500 Series Legs # RRRLKVA - Custom DK Fit Kit # DK227 The combination of these parts will give a strong,...
view full answer... - Roof Rack and Truck Bed Bike Carrier Options for 2004 Chevrolet Avalanche with Bare RoofYou have many options in roof racks for your 2004 Chevy Avalanche with bare roof including systems from Yakima, Thule and Rhino-Rack. You have a choice of basic round and square crossbar racks and also quieter aerodynamic types such as the Thule AeroBlade and Rhino-Rack Vortex Aero Crossbars. All can be seen using the link provided. Among the more cost-effective options is the Rhino-Rack 2500 system with aero bars consisting of parts # RRVA137B-2, # RRRLKVA, and # DK227. I have included...
view full answer... - Roof Rack and Kayak Carrier Recommendation for a 2009 Chevy SilveradoA fifth wheel trailer would interfere with being able to carry kayaks with the K2 Ladder Rack part # K2TFR150. How long are your kayaks? If they are shorter you may be able to install a roof rack and use carriers on the roof of the truck's cab. For a roof rack the Rhino Rack part # RRVA137B-2, # RRRLKVA, and # DK227 is a confirmed fit for your 2009 Chevy Silverado. Then for a kayak carrier the Thule part # TH834 would work well.
view full answer... - Roof Rack Recommendation for My 2010 Chevy Avalanche with a Bare RoofWe have something that works for your bare-roof 2010 Chevy Avalanche. For a great setup that works with your roof style, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 # RRVA137B-2 - Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points # RRRLKVA - Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK227 Not only is this rack designed specifically by Rhino-Rack...
view full answer... - Availability of Yakima Q-Clips for 2008 GMC Sierra Crew Cab Roof RackWe have a few roof rack options for you but the Yakima rack with Q-Clips has been discontinued and is no longer available for your truck. My recommendation for you is the Rhino-Rack consisting of the Vortex aero crossbars # RRVA137B-2, feet # RRRLKVA, and custom fit kit # DK227. This roof rack comes with the aero bars for less wind noise, a sleek look, and also comes with the integrated locks for security.
view full answer... - How To Carry Kayaks On a 2007 Chevrolet SilveradoIn order to carry kayaks on a 2007 Chevrolet Silverado you'll need to start with a roof rack, the Rhino-Rack Vortex Aero Crossbar System part # RRVA137B-2, part # RRRLKVA, and part # DK227 is my recommendation. Then in order to secure the kayaks, you'll need to do so on their side, the Rhino-Rack Nautic Stack Kayak Carrier part # RRS520 is a great cost effective option with the ability to expand if needed.
view full answer... - Roof Rack for Carrying Canoe With 2008 Chevy SilveradoWe do offer clamps designed to attach the roof rack feet to the vehicle, but I could not recommend altering a roof rack in any way. Altering an existing assembly would have unknown effects on its weight bearing ability, which wouldn't be safe. Rhino Rack offers an inexpensive yet strong rack system that consists of the # RRVA137B-2 crossbars, # RRRLKVA legs, and the # DK227 vehicle-specific clamp kit. This would provide a stable and strong rack for your canoe. I'd also suggest the Malone...
view full answer... - Solution for Preventing Wind Noise of Rhino Rack Roof Rack on Chevy AvalancheRoof racks like the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK227 generally add a bit of wind noise since the bars are on top of the vehicle where the wind is the most prevalent. You will want to make sure the rubber strips are in position on the top and bottom of the bars. We have also found that if you install a fairing like the part # RRRF4 on the front crossbar you can divert the wind over the bars and prevent the biggest portion of wind noise.
view full answer... - Can Roof Rack On 2013 Chevrolet Impala Be Used On 2009 Chevrolet Silverado Crew CabIf the Rhino-Rack 2500 Series legs on your 2013 Impala are part # RRRLKVA, you can use those on your 2009 Chevrolet Silverado Crew Cab. Unfortunately, those are the only parts you will be able to use. The crossbars for a 2013 impala we offer are 49 inches long. For the Silverado, the Vortex crossbars we have that are designed to fit are 54 inches long. To complete the roof rack for your Silverado you will need the legs mentioned above along with part # RRVA137B-2, and part # DK227....
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Updated by:
Alex H
Written by:
Bethann B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.